Fully Reconditioned Aga Range Cookers

The bare bones of pre-loved, unwanted cookers arrive into our workshop - ready for a second lease of life!

We sort through all of the bits and bobs, and recycle anything we can’t salvage before shotblasting all of her cast iron parts. Once all of the rust and imperfections are removed, we re-coat them to restore them to their original condition - ready for another lifetime of Sunday roasts, cakes and bakes.

Next, we use high-quality vitreous enamel to coat the front, doors, top and lid bands in a colour of your choice. All the chrome fixtures are replaced with new, including the lid domes, spring handles and towel rails. Internal, door and lid seals are replaced to make sure your Aga Range Cooker runs as efficiently as possible. 

The only thing you need to do is choose your style, fuel type and colour!

STEP 1: CHOOSE OVENS AND MODEL TYPE

We stock a mix of 2 and 4 oven Aga Range cooker models, in either a traditional style or the newer deluxe models.

STEP 2: CHOOSE A FUEL TYPE

You can choose between oil, natural gas, LPG gas or 13-amp Electric.

STEP 3: CHOOSE AN ENAMEL COLOUR

We have a range of 24 modern, high quality colours to match your style.

OIL FUEL SUPPLY

Run on Kerosene and require a 5" Flue to be installed in either an existing chimney or through a twin-wall system.

NATURAL GAS/LPG

Available in Conventional and Balanced Flue. Conventional requires a 4" flue in the form of a flexible liner, installed into an existing chimney or a twin wall style flue. Balanced requires an external wall and has a maximum flue length of 760mm.

13amp ELECTRIC SUPPLY

The latest addition to the Traditional Cast Iron Aga Range Cooker collection, this cooker has no flue requirement. It can be room venting with no noxious gases or you can request a small 1" vent pipe to an external wall. A 13amp Fused Spur is required to either the left or right hand side of the Aga Range Cooker - not directly behind.